Menu
Siemens zaps more data down home fiber link

Siemens zaps more data down home fiber link

Siemens has successfully tested technology that not only increases the speed of optical broadband connections but also the radius of coverage.

Comments

Researchers from Siemens have successfully tested technology that not only increases the speed of passive optical broadband connections to the home or office but also the radius of coverage.

The team of researchers, sponsored by the European Union, achieved downstream transmission rate of 10Gbps and upstream speed of 2.5Gbps over a passive optical access network, Siemens said.

By comparison, current gigabit passive optical network (GPON) technology supports downstream data rates of 2.5Gbps and upstream rates of 1.2Gbps.

In addition, the researchers were able to extend the distance between the hub and subscribers, the equivalent of the "local loop" in copper networks, from 20km to 100km. The number of subscriber lines per splitter, where the optical signal is divided up to serve more destinations, was also expanded from 64 to 512.

Numerous operators are keen to deploy high-speed broadband access systems that offer far greater speed than Digital Subscriber Line (DSL) technology, which used existing copper twisted pairs to provide data rates of up to 50M bps, Siemens said. Services such as video-on-demand and high-definition TV performed best when delivered over fiber-optic subscriber lines.

At the same, new GPON systems eliminated the need for aggregation devices commonly used to collect and distribute data traffic locally. In the future, operators would be able to connect subscribers directly to the core network, Siemens said.

Earlier this year, Siemens researchers achieved a transmission speed of 107Gbps over a single optical fiber.

The speed, which the company claims sets a record for electrical processing of data through a fiber-optic cable, was reached over a 100-mile route.

Siemens has developed a new transmission and receiving system that is able to process data directly before and after its conversion into optical signals using electrical processing only. Current systems handling very high data rates have to split signals into multiple lower data-rate signals and later reconvert them from optical to electrical, a process that adds to costs and reduces network capacity.


Follow Us

Join the newsletter!

Error: Please check your email address.
Show Comments