Media releases are provided as is by companies and have not been edited or checked for accuracy. Any queries should be directed to the company itself.

Have you ever wanted to easily add an additional IDE or SATA hard disk to your PC?

  • 05 June, 2006 10:18

<p>5th June 2006 – Using this USB to IDE/SATA converter you can now connect to one or two hard disks in less than a few seconds. The converter allows for either IDE or SATA hard disks or one of each to be in operation at the same time. Consumers will no longer need to install their hard disk into their PC case or into an external enclosure, ever. It will be truly plug and play.</p>
<p>This converter can also support CD/DVD burners. It is an excellent diagnostic tool for PC technicians or PC hobbyists. The converter can also be used as a quick and easy backup tool.</p>
<p>Features:
• Compliant with Gen1i of Serial ATA electrical specification 1.0
• Supports SATA asynchronous signal recovery (hot plug) feature
• Compliant with USB 2.0 electrical specification
• Supports USB high-speed and full-speed operation
• Compliant with USB mass storage class, bulk-only transport specification
• Supports ATA/ATAPI Ultra DMA mode 0,1,2,3,4,5
• Supports ATA/ATAPI PIO mode 0,1,2,3,4
• Supports ATA/ATAPI packet command set
• Supports dual LUN (logic unit number) with automatic master/slave enumeration.</p>
<p>Specifications:
• Connectors:
o USB – Type A Male
o IDE+SATA – IDE 40 Female and SATA 7 Male
• Cable length: 80cm
• OS Support: Windows 98SE/ME/2000/XP/2003/MAC OS X.3.6 or greater
• Data transfer rate: Full speed 12Mbps, high speed 480Mbps.</p>
<p>The USB-IDESATA connector is available for purchase now and retails for $43.00 AUD and $50.00NZD.</p>
<p>Anyware is a wholesaler only and does not sell directly to the public.</p>
<p>Distributed by Anyware Computer Accessories
Sydney I Melbourne I Perth I Adelaide I Brisbane I Auckland
1300 ANYWARE (1300 269 927)
Auckland PH: 64 9 634 8088</p>
<p>www.anyware.com.au
www.anywarenz.co.nz</p>

Most Popular