Menu
Cisco powers up Ethernet ports with standard

Cisco powers up Ethernet ports with standard

Cisco Systems is embracing a global standard for powering network-connected devices over Ethernet, allowing its customers to take advantage of a potential flood of third-party products such as sensors and wireless access points that don't require a conventional wall socket.

The standard, called IEEE 802.3af, is now available on a wide range of enterprise switching products from the dominant Ethernet vendor. Cisco previously used its own power-over-Ethernet technology, developed in 2000, before the standard was ratified.

It would continue to support that approach wherever possible in addition to 802.3af, senior manager of worldwide product marketing for LAN switching at Cisco, Steven Shalita, said.

Power over Ethernet technology is designed to ease the deployment of some devices connected to a LAN by eliminating the need to plug them into a conventional power socket.

The 802.3af standard offers more power than Cisco's earlier technology, potentially extending the range of devices that can be powered over the network to include IP security cameras, motion detectors and card readers.

It also opened the door to more advanced color Internet Protocol (IP) phones and multiband wireless LAN access points, Shalita said. With 802.3af support, a networked device will be able to draw as much as 15.4 watts of power from an Ethernet port over standard copper wire used for Ethernet. Cisco's older technology supported about 6.5 watts.

This was enough for some IP phones and wireless access points but not some other devices, he said.

"There's going to be a whole new range of devices that are going to be able to use power over Ethernet," Shalita said.

Traditional power outlets cost between $US100 and $US300 each, a cost that might be saved if a remote device can work without one, Shalita said.

Wall jack standards also vary from country to country. The 802.3af specification is the first standard for power that is uniform around the world. Besides opening up a broad market for gear that uses power over Ethernet, it may eventually make life easier for travelling users. Though it can't deliver enough energy to fully power a typical notebook PC, it could help extend battery life by trickle-charging a notebook - or an MP3 music player, Shalita said.

It's still early days for power over Ethernet, with a broad market emerging only since last June when the 802.3af standard was approved, but the technology was likely to come in handy, not just in "green field" sites but in existing buildings, Meta Group analyst, Chris Kozup, said.

"With the advent of power over Ethernet and with it being the first universal power standard, there is a lot of potential here for emerging applications," Kozup said.

As enterprises start harnessing IP to enhance functions such as building security and heating and cooling, being able to bypass conventional power systems simplified deployment, he said.

"You're kind of killing two birds with one stone," Kozup said.

Though standardisation might clear a path for some kinds of new devices from a variety of third parties, it was unlikely there would be a free-for-all with other technologies, such as IP phones, Kozup's said.

They would need to work with higher level functions to work with platforms such as Cisco Call Manager software, he said.


Follow Us

Join the newsletter!

Error: Please check your email address.
Show Comments