Menu
Wi-Fi tweaks for speed freaks

Wi-Fi tweaks for speed freaks

How to get the most speed and reach out of your wireless network.

One thing you can depend on these days is that the claims made for wireless routers, like 300Mbit/sec. throughput and 1,000-foot range, are nothing more than digital pipe dreams. The plain and simple truth is that these speeds and distances just aren't going to happen in your home, office or any place on this planet.

If you're disappointed by the speed and reach of your wireless network -- and who isn't? -- there's a lot you can do to grab every last bit of data and foot of range. I spent a few hours optimizing my network and more than doubled its indoor range from 90 to over 200 feet (with an additional 150-foot extension into my backyard) while increasing performance fifteenfold -- all with a two-year-old 802.11g router.

Some of the techniques I used are basic, like where and how to set up the router. Others are more involved and require special equipment, but they can make a world of difference. Plus, for those who don't know what to do when the data connection goes south, I've also included a troubleshooting checklist that can help get your network back into the fast lane.

The beauty of modern Wi-Fi equipment is that it all works together, so you can build a network with best-of-breed gear. For instance, my network has a router from one maker, antennas from another, a print server from a third and client radios from several different companies. Think of it as the UN of wireless: the world cooperates to make your online life a little easier.

Setup: Location, location, location

Where you put the router and how it's set up are two of the most important -- and often ignored -- aspects of creating an efficient wireless network. Most people put the router in the first place that comes to mind. Big mistake.

Think of the router as the center of a sphere of connectivity that extends out in all directions from its antennas. My advice is to put the router as close as possible to the physical middle of the home or small office it needs to cover. Start with a building floor plan or rough drawing, and draw diagonal lines from the corners to mark the center.

Of course, some people -- including me -- can't follow that advice. Perhaps you have a stone wall or a brick chimney in the middle of the building, or, as in my case, the cable line enters the building in the worst place possible. If for these or other reasons you can't put the antenna in the ideal center location, don't despair; I have solutions for you later.

Now, look around and find a good home for the router. Avoid corners (particularly in older buildings), which diminish the signal as it passes through, and don't put the router in a closet. A great place to stash a router unobtrusively is in a bookcase or an entertainment center.

Follow Us

Join the ARN newsletter!

Error: Please check your email address.

Tags Wi-Firepeaterwireless and wired network installationswirelessrouterantenna

Upcoming

Slideshows

IN PICTURES: VMworld 2015 Asia-Pacific and Japan party (+ 32 photos)

IN PICTURES: VMworld 2015 Asia-Pacific and Japan party (+ 32 photos)

VMware recently held an Asia-Pacific and Japan party for its partners in San Francisco following two days of keynotes and sessions. Whilst mingling and enjoying drinks and finger food, the partners were joined by VMware management who also took the opportunity to let their hair down to have some fun.

IN PICTURES: VMworld 2015 Asia-Pacific and Japan party (+ 32 photos)
IN PICTURES: VMworld 2015 sponsor and partner showcase (+41 photos)

IN PICTURES: VMworld 2015 sponsor and partner showcase (+41 photos)

VMware's sponsors and partners used the opportunity at VMworld 2015 to showcase some of their technologies. At an exhibition hall, these vendors educated those that popped by their stands on these solutions and addressed some of the issues surrounding mobility, datacentres, and the Cloud. SOme of the big names there included f5, Palo Alto Networks, HP, Intel, Samsung, and Symantec.

IN PICTURES: VMworld 2015 sponsor and partner showcase (+41 photos)
IN PICTURES: VMware's VMworld 2015 day 1 (+13 photos)

IN PICTURES: VMware's VMworld 2015 day 1 (+13 photos)

VMware has kicked off VMworld 2015 in San Francisco and the first day saw keynotes from its president and CEO, Carl Eschenbach; executive vice-president and general manager, Bill Fathers; and executive vice-president and general manager of SDDC, Raghu Raghuram; amongst others. VMware also made Cloud-related announcements and demonstrated its latest technology.

IN PICTURES: VMware's VMworld 2015 day 1 (+13 photos)

iasset.com is a channel management ecosystem that automates all major aspects of the entire sales, marketing and service process, including data tracking, integrated learning, knowledge management and product lifecycle management.

Show Comments